Frogmech Ltd were asked to provide a design and quotation for boiler and hot water cylinder replacement in the Sports Hall building.
Existing boiler had failed due to age and hot water cylinder was now over sized for the buildings hot water requirements.
We Installed a new wall mounted condensing boiler with stainless steel heat exchanger and all requirements to seal and pressurise the existing heating system. We fabricated a custom design low-loss header off site which would now supply the hot water primary circuit and heating circuit independently with a separate pump and independant controls on each circuit. As always we installed a magnetic filter to offer the system full future protection and aid removal of harmful sludge and dirt.
A smaller pressurised hot water cylinder was installed which now correctly met the hot water demand for the building. This now greatly reduced legionella risks throughout the hot water system and offered the client a hueg energy savings.
Our electrical team fully rewired the the new heating system and made all panel BMS panel modifications to suit.
The Installation was then fully insulated and identified by our team, The system was flushed and treated . All electrical work commissioned and tested, As well as the gas and boiler installation.
The sports hall building now had a reliable source of heating and hot water. System now completely clean and treated and high efficiencies were now been achieved.
Backed up with our installation guarantees the client was completely satisfied.
Here are just some of the reasons
why you should work with us…
Our primary focus with all installations are we want them too outlast anything else on the market. Pipework installed in time tested traditional methods with the highest quality equipment specified in all our installations.
Sick of dealing with large companies and never getting the same engineers or the engineers you trust. At Frogmech we are a smaller company and aim to build personal relationships, our engineers are friendly and professional.
48 Months Guarantee
Our 48 month installation guarantee’s are unrivalled. We ensure that the installations are of the highest quality which gives us the confidence to back this up.
All in One Place
Mechanical and electrical engineering all in house, why deal with numerous company’s when you can consolidate your services into one company you trust. Less paperwork, One point of contact. Exactly the same service and care provided for both aspects.
Are the welders you employ for your commercial installations coded? Ours are. No matter what the pipework application you can trust that the welding is been undertaken in the correct manner under the relevant procedure.
Click or press on the button to open our enquiry form and we’ll come
back to you ASAP with answers, options, prices and lead times.
Or call 07434 170 040
We also accept the upload and submission
of any tender documentation